Home > Textile machines > Fibre & Yarn > Short staple spinning

Cason

Cason from Italy produces bobbin slitters, rewinders, cleaners, recycling systems and core cutters. In the textile industry, cason is highly regarded for its fully automated bobbin cleaning systems, used for recycling. Engineering and customization are the cornerstone of Cason's solutions.

For more information, please contact one of our representatives or visit the manufacturers website.

www.casoncompanies.com

Contact

Emanuela Varalli
Via Parini 24, I - 21020 Montonate Di Mornago
21020 Montonate Di Mornago
Italy
+39 0331 909033
sales@cason-spa.com
www.casoncompanies.com

Representatives

Xavier Foucart
+32(0)9 333 88 80
+32(0)496 25 35 06
xavier.foucart@leclairmeert.be

Upcoming Exhibitions

No upcoming Exhibitions

Fadis

55 years to celebrate the oldest company leader in the production of precision winder machines, still owned and run by the same family!

Fadis was founded in 1960 with the purpose of manufacturing textile machines such as rewinders, soft winders, assembly winders, hank to cone winders, reeling machines, spooling machines and intermingling machines, which are meant to process all types of yarns such as cotton, wool, silk, artificial fibres, synthetic fibres, mixed fibres, intermingled yarns, fancy yarns.

Fadis is present in more than 70 countries all over the world. The last generation of precision winding machines clearly shows the importance we give to innovation, research and development of new models, new products, new materials and new technologies. The 100% made in Italy production is synonymous of quality, innovation and safety, guaranteed by the National Register of Italian Manufacturers.

Through its line of precision winding machines and its “OPEN PLATFORM”, Fadis has dedicated much attention to reducing power consumption and environmental impact. Fadis is one of the promoters of Acimit’s “SUSTAINABLE TECHNOLOGIES” project. Here, companies must equip themselves in order to offer solutions that put the reduction of the use of energy, water and chemical products at the heart of the production process. This will lead to a more responsible, careful about consumption and eco-friendly production cycle.

Using latest generation Brushless motors technology with step motors has allowed to reduce the energy consumption by more than 12%, thus emitting far less CO² in the air. Thanks to this saving, the SINCRO range machines consume much less energy than any similar machine now available on the market.

Another fundamental aspect of eco-sustainability is the attention placed on machine dimensions. Thanks to the use of a more modern structural design and of new, lighter and thus extremely compact materials, our machines require less investment in premises, lighting and electric consumption and thus a larger environmental protection of “green spaces”. The very compact design of the new machines allow to increase the available loading in containers by 33%.

Besides developing energetic savings for its products, Fadis also invested in the production process by using the sun as a renewable energy source, thus becoming completely energy autonomous. In fact, a photovoltaic system with 460 kW peak production has recently been inaugurated; its annual production of 650.000 kW allows a reduction of CO2 emissions in the atmosphere equal to 11,6 tons.


 

 Fadis is the only company in the world to offer a complete line of machines specifically studied for preparing yarn for the following dyeing processes, be it in form of bobbin, hank or FAPP™/Muff. We also offer all the machines to wind the dyed yarn. To choose the Fadis cycle (from start to end) represents a great advantage: Fadis becomes the reference partner who can advise and personalise the machines that best fit the customer’s needs.

Thanks to the innovative constructional philosophy called “open platform”, it is possible to create - together with the customer - a machine which fully responds to his technical/production requirements, and which can be modified at any time to meet new market needs.

This constructional flexibility allows the customer to identify - in a single basic model - all the processes he needs, with undeniable advantages with regard to personnel training, maintenance and production organization. Furthermore, it allows to process all types of yarn.

For more information, please contact one of our representatives or visit the manufacturers website.

www.fadis.it

Contact

Via Colombera 70
21048 Solbiate Arno
Italy
+39 0331 989533
sales@fadis.it
www.fadis.it

Representatives

Hans De Tremerie
+32(0)9 333 88 84
+32(0)496 25 35 04
hans.detremerie@leclairmeert.be

Upcoming Exhibitions

No upcoming Exhibitions

Loepfe

Loepfe Brothers Ltd. started business 60 years ago in 1955. Solutions for weaving mills significantly increased the efficiency of the production systems in the 1960s. WeftMaster provides components for weaving machines such as weft stop motions, short weft detectors, weft thread brakes, projectile brakes, knot detectors, weft feelers, fusible fabrics cutters and yarn stop motions for different applications. The first yarn clearer was produced in 1963 with basic clearing options. The subsequent focus was more on developing and manufacturing optical yarn clearers. From the 1990s onwards, Loepfe played a leading role in providing innovative solutions for spinning mills. Loepfe made a huge step forwards in 1991 with the yarn clearing generation YarnMaster. Loepfe set new standards in quality control with this pioneering first ever yarn clearer for conventional yarn faults.

YarnMaster spinning solution

A new yarn clearer generation YarnMaster ZENIT+ introduced in 2014, focused on state-of-the-art and fastest processors and measuring technology. These innovative technical components allow even more precise yarn clearing and a multi-layered evaluation of the measuring results. 100% online quality assurance no longer implies expensive and lengthy laboratory measurements. The easy to service and easy to operate central unit LZE-V provides a clearly structured user interface. The possibility of allowing experienced LOEPFE technicians to use remote control to check the status of the central unit and to perform software updates when needed improves reliability. Loepfe provides an extremely reliable tool to safely detect even the finest yarn irregularities. Just one

WeftMaster weaving solution: FALCON-i yarn defects sensor

The new WeftMaster Falcon-i introduced in 2014 is an optical yarn defects sensor and an important innovation contributing to knotless weaving fabrics. All conventional knot detectors have limitations in terms of size of yarn defects or knots to be detected. Installing the FALCON-i yarn defects sensor solves the problems faced in manufacturing high-tech fabrics, such as elimination of smallest knots, fluff or even filamentation from the weft yarn.

For more information, please contact one of our representatives or visit the manufacturers website.

www.loepfe.com

Luwa

Luwa , located in Uster, Switzerland, is the epitome of air engineering. With over 350 employees and an active network of representatives, Luwa sets the standard in creating the best of air conditions for manufacturing.

For more information, please contact one of our representatives or visit the manufacturers website.

www.luwa.com

Contact

Weiherallee 11a
8610 Uster
Switzerland
+41 449431100
sales-LCH@luwa.com
www.luwa.com

Representatives

Hans De Tremerie
+32(0)9 333 88 84
+32(0)496 25 35 04
hans.detremerie@leclairmeert.be

Upcoming Exhibitions

No upcoming Exhibitions

Neuenhauser

Neuenhauser is a big name in the texile world. With products ranging from batching motions for looms to automated transport systems and an ever-growing group of companies, Neuenhauser offers an increasing number of solutions to its customers.

About Neuenhauser Maschinenbau:

Neuenhauser Maschinenbau GmbH was established in 1955 as a machine design and manufacturing company.

In the 1970’s the first batch winder was manufactured. By constantly developing this product line, Neuenhauser today is a leader for batching motions and center winders with ten thousands of units installed worldwide.

 

With more than 30 years’ experience Neuenhauser has created a wide range of products for winding fabrics on weaving, knitting and other production machines.

Especially for winding of technical fabrics, such as coating-fabrics, Geo–Textiles, glass fibre and tire cord special developments were made in order to produce high quality fabric rolls.

 

The product range reaches from basic batch winders for standard woven fabrics to highly sophisticated winding units for technical weaving and knitting.

 

 

For more information, please contact one of our representatives or visit the manufacturers website.

www.neuenhauser.de

Contact

Wilhelm Langius
Hans-Voshaar-Strasse 5
49828 Neuenhaus
Germany
+49 5941 6040
neuenhauser@neuenhauser.de
www.neuenhauser.de

Representatives

Xavier Foucart
+32(0)9 333 88 80
+32(0)496 25 35 06
xavier.foucart@leclairmeert.be
Hans De Tremerie
+32(0)9 333 88 84
+32(0)496 25 35 04
hans.detremerie@leclairmeert.be

Upcoming Exhibitions

No upcoming Exhibitions

Saurer Schlafhorst

For more information, please contact one of our representatives or visit the manufacturers website.

www.schlafhorst.saurer.com/en/start

Contact

Carlstrasse 60
52531 Übach-Palenberg
Germany
+49 24519051000
info.schlafhorst@saurer.com
www.schlafhorst.saurer.com/en/start

Representatives

Francis Meert
+32(0)9 333 88 82
+32(0)496 25 35 02
francis.meert@leclairmeert.be

Upcoming Exhibitions

No upcoming Exhibitions

Trützschler

Trützschler is the world leader in fibre preparation for the spinning and non-wovens industry. With production facilities in 9 locations around the world, Trützschler aims to enforce its "always close" philosophy.

For more information, please contact one of our representatives or visit the manufacturers website.

www.truetzschler.com

Contact

Duvenstrasse 82-92
41199 Mönchengladbach
Germany
+49 21666070
info@truetzschler.de
www.truetzschler.com

Representatives

Francis Meert
+32(0)9 333 88 82
+32(0)496 25 35 02
francis.meert@leclairmeert.be
Hans De Tremerie
+32(0)9 333 88 84
+32(0)496 25 35 04
hans.detremerie@leclairmeert.be

Upcoming Exhibitions

No upcoming Exhibitions